Toyota Camry Manual page 2828

SR–46
Rack Guide
Spring Cap
SST
12°
SST
SST
Rack Guide
Spring Cap
STEERING
15.
(a)
(b)
W03098
(c)
W03099
(d)
(e)
W03100
(f)
SST
W03101
– POWER STEERING GEAR
ADJUST TOTAL PRELOAD
To prevent the steering rack teeth from damaging the oil
seal lip, temporarily install the RH and LH rack ends.
Using SST, torque the rack guide spring cap.
SST 09631–10021
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
Using SST, return the cap 12°.
SST 09631–10021
Using SST, turn the control valve shaft right and left 1 or
2 times.
SST 09616–00010
Using SST, loosen the cap until the rack guide spring is
not functioning.
SST 09631–10021
Using SST and a torque wrench, tighten the cap until the
preload is within specification.
SST 09616–00010, 09631–10021
Preload (turning):
0.8 – 1.4 N·m (8 – 14 kgf·cm, 6.9 – 12.2 in.·lbf)
Author : Date :
2141