Toyota Camry Manual page 2690

SUPPLEMENTAL RESTRAINT SYSTEM
y
y
Weight
Inner Diam.
Tires
(3 or More)
(e) Install the SST.
CAUTION:
Place the disc wheel on the level ground.
SST
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
H06696
cure some slack for the SST wire harness inside the disc
wheel.
(2)
(f) Cover the steering wheel pad with a cardboard box or
tires.
F
x
Size of cardboard box:
Must exceed the following dimensions:
x= 460 mm (18.11 in.)
H00401
When dimension of the cardboard box exceeds the di-
ameter of the disc wheel with tire to which the steer-
ing wheel pad is tied
x= 460 mm (18.11 in.) + width of tire
y= 650 mm (25.59 in.)
NOTICE:
If a cardboard box smaller than the specified size is used,
the cardboard box will be broken by the shock from the air-
bag deployment.
F
Width
Tire size: Must exceed the following dimensions–
Width: 185 mm (7.87 in.)
Inner diameter: 360 mm (14.17 in.)
R04211
– STEERING WHEEL PAD AND SPIRAL CABLE
Connect the connector of SST to the steering wheel
pad connector.
09082–00700
Move the SST to at least 10 m (33 ft) away from the
steering wheel pad tied down on the disc wheel.
Covering method using a cardboard box:
Cover the steering wheel pad with the cardboard
box and weight the cardboard box down in 4 places
with at least 190 N (20 kg, 44 lb).
Covering method using tires:
Place at least 3 tires without disc wheel on top of the
disc wheel with tire to which the steering wheel pad
is tied.
Author :
RS–23
Date :
2168