Toyota Camry Manual page 2702

SUPPLEMENTAL RESTRAINT SYSTEM
SST
Battery
Front Passenger
SST
Airbag Assembly
10 m (33 ft) or more
(c) Check functioning of the SST.
SST
Battery
AB0158
(d) Place tires.
(1)
(2)
Tires
(5 or more)
H04528
(3)
CAUTION:
Make sure that the wire harness is tight. It is very danger-
ous if loose wire harness result in the tires coming free due
to the shock from the airbag deploying.
HINT:
Place the SST connector and wire harness inside tires. Provide
at least 1 m (3 ft) of slack for the wire harness.
R05403
(e) Install the SST.
Connect the connector of 2 SST to the front passenger
airbag assembly connector.
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
(f) Deploy the airbag.
(1)
R09690
(2)
(3)
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
– FRONT PASSENGER AIRBAG ASSEMBLY
09082–00700
Place at least 2 tires under the tire to which the front
passenger airbag assembly is tied.
Place at least 2 tires over the tire to which the front
passenger airbag assembly is tied. The top tire
should have the wheel installed.
Tie the tires together with 2 wire harness.
09082–00700, 09082–00760
Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(–) terminal.
Check that no one is within 10 m (33 ft) area around
the tire which the front passenger airbag assembly
is tied to.
Press the SST activation switch and deploy the air-
bag.
Author :
RS–35
Date :
2180