Toyota Camry Manual page 2835

SUSPENSION AND AXLE –
4. CHECK WHEEL BEARING LOOSENESS
(a) Check the backlash in the bearing shaft direction.
Maximum: 0.05 mm (0.0020 in.)
(b) Check the axle hub deviation.
Maximum: 0.05 mm (0.0020 in.)
5. CHECK FRONT SUSPENSION FOR LOOSENESS
6. CHECK STEERING LINKAGE FOR LOOSENESS
7. CHECK BALL JOINT FOR LOOSENESS
8. CHECK SHOCK ABSORBER WORKS PROPERLY
W03084
z
Check for oil leaks
z
Check mounting bushings for wear
z
Check front and rear of the vehicle for bounce
TIRE AND WHEEL
Author :
SA–3
Date :
1954