Related
•
Commands
•
•
•
dot1x host-mode
Enable single-host or multi-host authentication.
Z9500
Syntax
dot1x host-mode {single-host | multi-host | multi-auth}
Parameters
single-host
multi-host
multi-auth
Defaults
single-host
Command
INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.4.1.0
8.3.2.0
Usage
•
Information
•
802.1X
dot1x auth-fail-vlan
dot1x reauthentication
dot1x reauth-max
show dot1x interface
Enable single-host authentication.
Enable multi-host authentication.
Enable multi-supplicant authentication.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added the multi-auth option on the C-Series and S-
Series.
Added the single-host and multi-host options on the
C-Series, E-Series, and S-Series.
Single-host mode authenticates only one host per authenticator port and drops
all other traffic on the port.
Multi-host mode authenticates the first host to respond to an Identity Request
and then permits all other traffic on the port.
199