Subaru XT 1988 Service Manual page 880

4-3
No.
Part Name
1
Rack
•
•
2
Pinion ASSY
•
•
•
3
Oil seal
4 Snap ring
•
(Big)
5 Gearbox unit
•
•
•
•
•
6 Boot
•
7 Tie-rod CP
•
•
8 Lock washer
9 Tie-rod end
•
10 Sleeve spring
•
STEERING SYSTEM
Inspection
Faults on tooth face: Dent, wear, cracks, and other damages.
Bend in rack shaft
rl
~
~~
Fig.
69
A18·068
Limit:
0.2 mm (0.008 in) (runout)
Faults on pinion tooth face: Dent, wear, cracks, and other
damages.
Ball bearing: Free play, noise, binding
Snap ring: Deformation
Deformation
Cracks or other damage in aluminium die-cast
Cracks, bend, or deformation in pipe
Displaced needle bearing roller
Wear or damage on bushing A
Wear or deterioration of adapters A and B
Cracks, damage, or deterioration
Free play in ball joint
Bend in tie-rod
.
Damage or deterioration in dust seal
Fatigue
Free length (standard):
20.3 mm (0.799 in)
34
Corrective action
} Replace rack and pinion
ASSY as a unit.
I
Replace pinion ASSY
and rack as a unit.
When replacing, be sure
to use SUBARU genuine
parts.
Replace.
Always replace when oil
seal is removed.
Be sure to use SUBARU
genuine parts.
} Replace gearbox unit.
Replace.
Replace.
Replace.
Replace.
Replace .
Always replace when
it is removed.
Replace.
Replace.
u
C
t
~
~
c
>
.
I