Subaru XT 1988 Service Manual page 423

ENGINE AND TRANSMISSION MOUNTING SYSTEM 2-11
17) Support engine with a lifting device and wire ropes.
Fig. 20
18) Remove bolts which hold upper side of engine to trans-
mission.
19) Support transmission with a garage jack.
Transmission case
L2·1159
Fig. 22
Before moving engine away from transmission, cbeck to
be sure no work has been overlooked. Doing this is very
important in order to facilitate re-installation and because
transmission lowers under its own weight.
20) Remove engine itself.
(1) Slightly raise engine.
(2) Raise transmission with a garage jack.
(3) Move engine in the direction of the arrow in the
figure.
Move engine in axial direction until main:shaft is withdrawn
from clutch cover. (MIT)
L2·1445 L2·1446
L -______________________________________
~
Fig. 21 Fig. 23
15