Subaru XT 1988 Service Manual page 487

3-1 MANUAL TRANSMISSION AND DIFFERENTIAL
L3-510
Fig. 118
@
Install ball, spring and gasket in extension and tighten
plug.
Tightening torque:
19.6 ± 1.5 N'm (2.0 ± 0.15 kg-m,14.5 ± 1.1 ft-Ib)
22) Installing extension cover and shifter bracket
Secure cover and shifter bracket to extension with the five
bolts.
Tightening torque:
33 ± 3 N·m (3.4 ± 0.3 kg-m, 24.6 ± 2.2 ft-Ib)
Fig. 119
23) Install transfer cover with gasket and tighten bolts.
24) Installing differential lock bracket
Tighten with the three bolts.
Tightening torque:
15.7 ± 1.5 N·m (1.6 ± 0.15 kg-m, 11.6 ± 1.1 ft-Ib)
54
Fig. 120
25) Installing actuator & cable ASSY
Install on the case (left) with the three bolts. Also install
cable plate with the two bolts.
Tightening torque:
15.7 ± 1.5 N·m (1.6 ±0.15 kg-m, 11.6 ± 1.1 ft-Ibl
Fig. 121
261 Adjusting cable length
CD
Move differential lock lever to the center differential
lock side while turning main shaft.
Fig. 122