Subaru XT 1988 Service Manual page 1174

INSTRUMENT PANEL
INSTALLATION
Installation is in the reverse order of removal.
Observe the following:
1) Two persons should install instrument panel in vehicle.
Be careful not to strike it against adjacent parts during installa·
tion.
2) While setting instrument panel in position, be careful not
to obstruct air outlets of heater and blower with harness
connectors.
Also, do not allow them to be caught between bracket and
instrument panel.
Fig. 9
5-4
3) Disengage lock from striker, remove pocket from instru·
Pocket
ment panel.
REMOVAL
1) Remove lower cover on passenger's side.
INSTALLATION
2) Remove screws which hold hinge located at the lower
section of pocket. Installation is in the reverse order of removal.
5