Subaru XT 1988 Service Manual page 1146

5-3
SEATS, SEAT BELTS, AND INTERIOR
(XT-6 model)
Rear Seat
To remove the headrest, lightly turn lock release knob
(counterclockwise) located on the upper left side of the seat
FOLDABLE BENCH SEAT
backrest and lift out headrest. The lock release knob is able to
be seen after lifting the left bellows (as viewed from the rear
of the car).
To install the headrest, align headrest stays with the hole
and push headrest in firmly.
When turning lock release knob, be careful not to damage the
seat cover.
(Unlock)
Fig. 8
Operation
8
(Lock)
L5-645
L5-644
1) Unlock key located under strap and pull strap. Backrest
~----------------------------------~~~
Fig. 7
will then tilt forward.
4