Subaru XT 1988 Service Manual page 1362

6-3
WIRING DIAGRAM AND TROUBLESHOOTING
(3) When fasten seat belt warning light does not turn on, but chime sounds;
Turn ignition switch to ON
position.
*,
Check if other pilots in com-
bination meter activate.
Yes
Poor connection between
combination meter and its
connector.
1-------0--1 Confirm that chime sounds
for 6 seconds, and then the
sound dies down.
No
Blown bulb of fasten seat belt
warning light, or defective
wire, or poor connection.
1-------0 __ 1 Repair connector, or replace
timer circuit in combination
meter.
*,: Never leave the switch in ON position all the way.
90
1-------.
Replace bulb, and/or repair
connector and wire.
I