Subaru XT 1988 Service Manual page 1249

BODY ELECTRICAL SYSTEM
6-2
REMOVAL AND INSTALLATION
Steering wheel
Combination switch
Column cover (Lower)
Fig. 47
r-----!77--
Illumination control unit
Case (AI
l6-498
Fig. 48
39
Column cover (Upper)
Control wing
Steering lock
L6-1766
1) Remove screws and detach lower cover.
2) Remove fixing screws and detach column covers (upper
and lower).
3) Take out steering wheel cover and steering wheel.
4) Detach clip and band fitting harness to steering column.
5) Remove screws and take out combination switch.
6) Remove fixing bolts and detach control wing.
7) Remove screws and separate case A and case B from
control wing.
8) Installation is in the reverse order of removal.
a. To remove switch knob, lightly push pawl inside it using a
pin and pull the knob out.