Subaru XT 1988 Service Manual page 1158

5-3 SEATS, SEAT BELTS, AND INTERIOR
EMERGENCY RELEASE BUCKLE
Check that tongue properly releases when emergency release
button is pressed. Also check that click is heard to indicate
proper latching when tongue is inserted into emergency release
buckle.
ELR Assembly
REMOVAL
1) Push emergency release button on the shoulder anchor
and remove belt.
2) Remove belt stopper. Withdraw shoulder belt from belt
guide and wind on shoulder belt until the end reaches outlet
hole on console box.
L5-668
Fig. 36
3) Remove front seat.
4) Remove console box.
5) Remove anchor bolts which hold ELR ASSY.
Fig. 37
16
DISASSEMBLY
Remove M6-bolts which mount base of ELR.
Fig. 38
ASSEMBLY AND INSTALLATION
Reverse the removal and disassembly procedures.
OPERATION CHECK
Perform operation checks before installing new parts.
1) Align point of ELR ASSY with floor tunnel and tempo·
rarily install E LR ASSY. Check that shoulder belt winds and
unwinds properly.
2) GraduaJly tilt E LR ASSY. Check that ELR locks so that
belt cannot be withdrawn when ELR is tilted 45° or more in
relation to standard installation angle, and that ELR unlocks
when it is tilted within 15°.
Standard installation angle L5·733
Fig. 39