Subaru XT 1988 Service Manual page 633

3-2 AUTOMATIC TRANSMISSION AND DIFFERENTIAL
ASSEMBLY
R the d isassembly sequence, pay everse ing attention to the
following points:
B sure to properly position the steel balls, orifice and
a. e
strainer.
<
Upper valve body>
Strainer location
Nine steel ball location
Fig. 174
b. Tighten two locating bolts. Then tighten the upper-lower
valve body tightening bolts.
Tightening torque: 65 ft-Ib)
7 9 N'm (0.7 - 0.9 kg-m, 5.1 - .
3. Oil Pump Assembly
DISASSEMBLY
1) Remove the oil seal retainer. .
Also remove the O-ring and oil seal (air breather).
Fig. 175
106
<
Lower valve body>
L3-922
Oil seal retainer
L3·676