Subaru XT 1988 Service Manual page 919

STEERING SYSTEM
4-3
Hose B
Hose A
Flange bolt
Bracket
Pipe C
L4-365
Fig. 188
5) Install pipes C and 0 to gearbox ASSY.
Tightening torque:
10 - 20 N·m (1.0 - 2.0 kg·m, 7 - 14 ft·lb)
Tighten pipe C first, and pipe D second.
Fig. 189
6) Install clamp C to hoses A and B, and tighten with flange
bolt.
Fig. 190
73
7) Install clamp B to hoses A and B, and tighten with flange
bolt.
Fig. 191
8) Connect pipes A and B to four joints of gearbox ASSY.
Tighten upper pipe B first, and lower pipe A second.
Tightening torque:
10 - 16 N'm (1.0 - 1.6 kg·m, 7 - 12 ft·lb)
Fig. 192
9) Install jack-up plate and clamp A.
10) Install front exhaust pipe ASSY.
Refer to "EXHAUST SYSTEM".
11) I nstall exhaust sensor connector.
12) Connect ground cable to battery.
13) With vehicle raised, feed the specified fluid and discharge
air as follows.