Subaru XT 1988 Service Manual page 1356

6-3
WIRING DIAGRAM AND TROUBLESHOOTING
Front limit switch is close.
Check if front limit switch terminals open
No
Front limit switch is faulty.
when front limit switch is pushed with a
screwdriver.
Yes
Disconnect and then reconnect battery
No
Foreign matter caught in rail or insufficient
cables. Check if shoulder belt anchor moves stroke of rail ASSY.
to the front when door is opened.
Yes
Check if front limit switch connector
No
Faulty front limit switch or insufficient
terminals are open.
stroke of rail ASSY.
Yes
Check if front limit switch terminals of body
No
I Wiring is shorted.
connector (on control unit side) and ground
termi nal are open.
Yes
Motor is faulty. (See page 86.)
Front limit switch is open.
Check if front limit switch connector is
No
I
I
I
Connect.
connected properly.
Yes
Check if front limit switch connector
No
terminals (on switch side) are closed.
: Front limit switch is faulty. I
Yes
Check if there is continuity between front
No
: Wiring is broken.
I
limit switch terminal of body connector
(on control unit side) and ground terminal.
Yes
: Control unit is faulty. I
84