Subaru XT 1988 Service Manual page 647

3-2
AUTOMATIC TRANSMISSION AND DIFFERENTIAL
6) Press-fit the ball bearing_ 12. Transfer Valve Body
DISASSEMBLY
INSTALLER (899580100)
bearing
L3-717
Fig_ 220
L3-719
Fig_ 222
1) Remove the plate. Then remove the spring and pilot valve
7) Coat the seal ring with vaseline, and install it in the seal together.
ring groove of the shaft. 2) Remove the straight pin and pry out the plug with a
Do not expand the seal ring excessively when installing.
Seal ring
L3-718
Fig_ 221
screwdriver. Then extract the spring and transfer clutch valve
together.
Be careful not to damage the valve and valve body.
INSPECTION
Check each component for harmful cuts, damage, or other
faults.
ASSEMBLY
To assemble, reverse the removal sequence.
Make sure the valve slides smoothly after assembling.
120
I