Subaru XT 1988 Service Manual page 906

4-3 STEERING SYSTEM
L4-760
Fig. 153
Oil Pump (Power Steering
System)
REMOVAL
1) Remove ground cable from battery.
2) Drain the working fluid about 0.3 Q (0.6 US pt, 0.5 Imp
pt) from oil tank.
Fig. 154
3) Loosen (do not remove) oil pump pulley nut_
Fig. 155
4) Loosen pulley belt(s).
5) Remove the nut and detach oil pump pulley.
6) Disconnect hose A from pipe 1;. Disconnect hose B from
oil tank.
Fig. 156
a. When disconnecting hose A, use two wrenches to prevent
pipe E from twisting.
b. Do not allow fluid from the hose end to come into contact
with pulley belt.
c. To prevent foreign matter from entering the hose and pipe,
cover the open ends of them with a clean cloth.
7) Remove clamp which secures pipe E to oil tank.
/
Clamp~
/,
Pipe
E~
Oil tank stay
Bracket
L4-764
Fig. 157
60
8) Loosen bolt which secures oil tank stay to bracket_
9) Loosen bolts A and B located on the upper surface of oil
tank.