Subaru XT 1988 Service Manual page 461

3-1 MANUAL TRANSMISSION AND DIFFERENTIAL
a. When taking out fork, move reverse checking sleeve 2 to
3 mm (0.08 to 0.12 in) toward outside by loosening it.
b. Be careful not to
dr~p
ball when removing transfer shifter
rod.
Spring
Transfer shifter fork CP
Tra nsfer sh ifter rod
10) Remove transfer case plug with gasket and then remove
reverse accent spring and ball (7.1438).
L3-502
L3.256
Fig. 32
~----------------------------------------~
Fig. 29
7) Removing bolts from extension
Remove seven bolts from extension.
Fig. 30
8) Removing extension and transfer gear ASSY
Remove extension & transfer gear ASSY.
9) Removing transfer shifter shaft
Extension
L3·111
Extract transfer shifter shaft from the right side of transfer
case.
L3·257
Fig. 31
11) Remove the two bolts from reverse check sleeve ASSY
and move the sleeve ASSY until it rotates freely.
LReverse check sleeve
L3·503
Fig.
33
12) Removing shifter fork screw from selector arm
Remove shifter fork screw securing selector arm to shifter arm
CPo
----
L3·204
Fig. 34
28