Subaru XT 1988 Service Manual page 972

BRAKES 4-4
L4·1343
Fig. 50
9) Remove piston seal by using a strip driver with taking
special care so as not to scratch the inner wall of cylinder.
Fig.
51
10) Remove guide pin boot from caliper body.
Fig.
52
Replace the removed boot with • new one.
11) Remove retainer and lever cap, then remove retaining
spring from lever
&
spindle.
25
L4·1345
Fig. 53
The lever cap may only be pulled out of the groove in the
caliper body.
A17·121
Fig.
54
12) Press spring washer (coned disc spring) with PULLER
(925471000) to eliminate a load applied to lever & spindle
through spring washer, pull out lever & spindle.
Detach PULLER, and then remove connecting link and return
spring.
A17·309
Fig. 55