Subaru XT 1988 Service Manual page 630

AUTOMATIC TRANSMISSION AND DIFFERENTIAL
3-2
6) Tap out the speedometer shaft to the outside of the case,
and remove the oi I seal.
Fig. 163
6. Extension Section
1) Take out the transfer clutch by lightly tapping the end of
the rear drive shaft.
Be careful not to damage the oil seal in the extension.
Transfer clutch
L3·572
Fig. 164
2) Remove the transfer pipe.
Be careful not to bend the pipe.
Transfer pipe
L3·573
Fig. 165
3) Remove duty solenoid C and the transfer valve body.
a. Take out the inlet filter.
b. Do not damage the O-ring.
Fig. 166
4) Take out the roller bearing.
Fig. 167
103
Duty sol. C
L3-574
PULLER ASSY
(398527700)
Roller bearing
L3-575