Subaru XT 1988 Service Manual page 535

AUTOMATIC TRANSMISSION AND DIFFERENTIAL
3-2
The differential bevel gear is locked to the axle shaft by a clip.
Pull-off load in the
direction of arrow: 1,177 N (120 kg, 265 Ib)
L3·614
Fig. 33
3) SPEEDOMETER GEAR SYSTEM
.?
o
Converter case
+ 0
,....
C ~
Speedometer shaft
fJ
, 0
['\l
C\j
Fig. 34
Oil seal
Snap ring
'ft::~l£---- Washer
Speedometer
driven gear
l::i--
Speedometer
drive gear
L3-615
21
The speedometer drive gear is mounted directly on the differ-
ential case, and the flexible cable is led from the right side of
the converter case. With this arrangement, the speedometer
drive and driven gears are properly lubricated.
3-7 Hydraulic Control System
The hydraulic control system consists of an oil pump, control
valve bodies, clutches, brakes and connecting passages and
pipes. When it is activated manually, or automatically by the
electronic control system, it hydraulically controls the gear-
shifting mechanism.