Subaru XT 1988 Service Manual page 682

AUTOMATIC TRANSMISSION AND DIFFERENTIAL 3-2
Fig. 296
2) Install solenoid valves.
(1) Sh ift solenoids, 1, 2 and 3.
(2) Duty solenoid A (line pressure).
Solenoid ASSY
Fig. 297
3) Install valve body.
Tightening torque:
8 N·m (0.8 kg-m, 5.8
ft-Ib)
L3-980
Solenoid·1 (shift)
Solenoid·3
(overrunning clutch)
L3·618
• Secure accumulator springs using vaseline.
• Align manual valve connections.
• Tighten duty solenoid B (lock-up) bracket and two bolts
(also used to tighten valve body).
L3-982
Fig. 298
4) Install oil strainer.
Also install oil pipe and harness connector bracket.
Tightening torque:
2.9 ± 0.5 N·m (0.3 ± 0.05 kg-m, 2.2 ± 0.4 ft-Ib)
Fig. 299
5) Connect harness connectors at 5 places.
(1) Connect connectors of same color.
(2) Secure connectors to valve body using clips.
For Duty Sol. A
L3-544
rn~;-r,;-j7--
For Duty Sol. 2 (shift)
Fig. 300
6) Install oil pan
&
gasket.
Tightening torque:
For Sol. 1 (shift)
Sol. 3 (shift)
For Duty Sol. B
For A TF temp. sensor
L3·543
3.9±0.5 N·m (0.4±0.05 kg-m, 2.9±0.4 ft-Ib)
L3-985
Fig. 301
155