Subaru XT 1988 Service Manual page 1165

/
SEATS, SEAT BELTS, AND INTERIOR
5-3
12) Remove coat hanger on driver's side.
13) Remove sun visor and hook.
Fig.
58
14) Remove clips A which hold trim to roof, using CLIP
PU LLER (925580000) (7 places on sun roof models and
place on all other models).
15) Remove roof trim from car body.
Do not fold edge section of room trim Vllhen removing.
Fig. 59
23
Floor Mat
REMOVAL
1) Remove front seat.
2) Remove rear seat cushion. (On DL models, remove trim
cushion.)
3) Remove E LR unit of the manual lap belt.
4) Remove console box.
5) Remove front pillar lower trim panel.
6) Remove clips (3 places) from rear section of floor mat.
7) Remove side cover plate.
L5-684
Fig. 60
8) Undo mat hooks.
9) Detach velcro tape of front apron section.
10) Straighten hooks at toeboard location and detach mat.
11) Detach mat from hooks at lower section of heater unit.
12) Remove mat, without disturbing hand brake lever, etc.
INSTALLATION
Installation is in the reverse order of removal.
a. Be sure floor mat is held with hooks and velcro tape.
b. Be sure side cover plate is held with clips.