Subaru XT 1988 Service Manual page 1360

6-3
WIRING DIAGRAM AND TROUBLESHOOTING
(1) When chime does not sound and also fasten seat belt warning light does not turn on;
Turn ignition switch to ON
position while driver's seat
belt is not fastened. *1
No
Check devices in
Inspect fuse, connector and
Replace fuse if it is blown. if other
•
combination meter activate.
wire between ignition switch
•
Repair connector and
Yes
and timer.
wire.
See if 12V is in RY lead of
No
Poor connection
between Repair connector or replace
21-P connector
(blue)
of timer and its connector, or
timer.
meter.
defective timer.
Yes
Replace timer circuit in com·
bination meter as timer cir-
cuit is faulty.
*1: Never leave the switch in ON position all the way.
88