Subaru XT 1988 Service Manual page 991

4-4 BRAKES
Parking (Hand) Brake
Parking (Hand) Brake Lever
REPLACEMENT
1) Remove parking brake cover.
2) Disconnect electric connector for parking brake switch.
Parking brake lever
L
L4·1218
Fig. 107
3) Loosen parking brake adjuster, and remove inner cable
end from equalizer.
4) Remove parking brake lever.
5)
Install parking brake lever in the reverse order of removal.
Torque (Lever installing bold:
10 - 18 N'm (1.0 - 1.8 kg-m, 7 - 13 ft-Ib)
6) Adjust parking brake.
brake".)
(See "Adjustment of parking
Parking (Hand) Brake Cable
REPLACEMENT
1) Loosen front wheel nuts.
2) Jack up vehicle, and support it with safety stands (rigid
...----_=Adjuster
11-
-~~-\_----L
_____
. 4·1219
Fig. 108
6)
Pull out parking brake cable clamp from caliper, and
disconnect cable end.
Fig. 109
7) Remove bolt and bracket from transverse link.
8) Remove bolt and clamp from leading bracket.
\
Parking brake cable
racks). Fig. 110
3) Remove front tires and wheels.
4) Remove parking brake cover.
5) Loosen parking brake adjuster, then remove inner cable 9) Detach parking brake cable from cable guide at rear
end from equalizer, and detach clamps. crossmember.
44
,
t
!
I