Subaru XT 1988 Service Manual page 414

2-11
ENGINE AND TRANSMISSION MOUNTING SYSTEM
INSTALLATION
Install engine to transmission and tighten engine to transmission
nuts and bolts.
Remove garage jack and wire rope.
(A/T)
•
I
Tighten torque converter mounting bolts.
J
Tighten front engine mount nuts.
I nstall buffer rod to engine side.
Install exhaust system (front exhaust pipe).
Connect flexible hoses (A/C).
Install cooling system.
(:
Heater hoses (IN and OUT)
Radiator ASSY
*
Fill cooling system with coolant.
Install air intake system.
*
Connect cables, hoses and harness connectors.
Connect ground cable to battery terminal and engine side.
Check and correct coolant and oil levels.
This flowchart shows the main procedure for removing and installing the engine and its related parts. For details, refer to the
text.
6