Subaru XT 1988 Service Manual page 492

MANUAL TRANSMISSION AND DIFFERENTIAL
3-1
7) Press out transfer driven gear.
Tool No. Tool name
899580100 REMOVER
L3·404
Fig. 140
ASSEMBLY
1) Press needle bearing (58 x 72 x 16) into the bore in trans-
fer case and secure with snap ring (lnner-72).
Tool No.
Tool name
498175400
INSTALLER
499755502
INSTALLER
L3-405
8) Remove snap ring (Inner-56) and press out ball bearing Fig. 141
(22
x
56
x
16).
Tool No. Tool name
899754112 PRESS
Do not reuse ball bearing.
9) Remove snap ring (lnner-72). Remove needle bearing
(58
x
72
x
16) using INSTALLER and a press.
Tool No. Tool name
398663600 SNAP RING PLIERS
499755502
INSTALLER
2) Install ball bearing (22 x 56 x 16) using a press and
INSTALLER and install snap ring (Inner-56).
Tool No.
Tool name
899874100
INSTALLER
\
L3-406
Fig. 142
59