Subaru XT 1988 Service Manual page 491

3-1
MANUAL TRANSMISSION AND DIFFERENTIAL
3) Remove
CD
back-up light switch,
®
neutral switch and
®
differential lock pilot switch.
Fig. 136
4) Using REMOVER 2, drive out straight pin (5 mm dia. x
25). Remove differential lock lever ASSY.
Tool No. Tool name
398791600 REMOVER 2
L3-401
Fig. 137
58
5) Using REMOVER 2, drive out straight pin (5 mm dia. x
25) through the hole for differential lock switch. Remove
fork, differential lock shaft and lock sleeve.
Tool No.
398791600
Differential
lock rod
Fig. 138
Tool name
REMOVER 2
~
Difi",",'"
61o....z.....
lock shaft
L3-881
6) Place splined end of transfer driven gear in a vise. Unlock
lock plates and remove lock nuts (30 x 12).
a. Use soft vise jaws (such as aluminum plates, etc.) when
placing driven gear in vise.
b. Use a hex. socket wrench whose width across flats is
30mm.
L3-403
Fig. 139