BODY ELECTRICAL SYSTEM
6-2
OPERATION AND FUNCTION
TRIP
Fig. 31
Display
Display range
Function
ARRIVE
L6-1265
The travelled distance is shown by four digits of the 7-segment figures. While distance is being
displayed, the TRIP button on the control unit is illuminated. "0" as a high-order digit is
indicated by a blank.
~
Unit
Display range
Interval displayed
Mile
miles
0.0 - 999.9
0.1 mile
km
km
0.0 - 999.9
0.1 km
•
The travelled distance is displayed when the TRIP button is depressed.
•
If the "RESET" switch is depressed for more than·l.2 seconds in the TR IP functions, dis-
play returns to "0.0", and clocking of distance starts again in units of 0.1.
•
In case of overflow in the display, i.e., more than 999.9 is travelled the display returns to
"0.0", and then continues.
•
While the ignition switch is turned to ON, counting is performed if an other function button
is depressed.
•
The count increases by 1.0 km each time 637.5
x
4
pulses are applied.
•
The count increases by 1.0 mile each time 1020 x 4 pulses are applied.
•
"0.0" is displayed immediately after the battery is connected. (No memory is retained when
the battery is disconnected.)
25