Subaru XT 1988 Service Manual page 1246

6-2
BODY ELECTRICAL SYSTEM
REMOVAL AND INSTALLATION
1 ) Remove screws and detach lower cover.
2) Remove fixing screws and detach column covers (upper
and lower).
3) Take out steering wheel cover and remove nut using
Special Tool. Then, detach steering wheel.
4) Detach clip and band fitting harness to steering column,
and disconnect the connectors.
5) Remove screws fixing combination switch to control wing
bracket, and take out combination switch.
6) Installation is in reverse order of removal.
Control Wing
Lighting switch side
ilmll
TO
@
TO@
Fig.
44
Wiper switch side
o
E F G H
N 0 P Q R
TO@>
36
L6·1489