Subaru XT 1988 Service Manual page 427

ENGINE AND TRANSMISSION MOUNTING SYSTEM 2-11
Fig. 28
3) Remove clutch cable and hill-holder cable.
(MIT)
4) Remove meter cable.
5) Disconnect the following harness connectors.
(AIT)
• O
2
sensor connector
• Transmission harness connector
• Inhibitor switch connector
• Revolution sensor connector (4WD)
(MIT)
• O
2
sensor connector
• Neutral switch connector
19
L2-1451
~~
'_~~~
Diff.lock vacuum
• Transmission cord connector (back-up and diff. lock
indicator light switch) (Full-Time 4WD)
6) Disconnect the following hoses .
• Diff. lock vacuum hose (MIT Full-Time 4WD)
Remove clip band which secures air breather hose to pitching
stopper in advance. (A/T)