Subaru XT 1988 Service Manual page 428

2-11
ENGINE AND TRANSMISSION MOUNTING SYSTEM
7) Remove starter from transmission case.
8) Remove air intake boot.
Fig. 29
9) Remove timing hole plug and four torque converter
attaching bolts. (AfT)
Be careful not to slip wrench off bolt. It may strike and
damage bolt head.
Fig. 30
10) Disconnect pitching stopper rod from bracket.
Fig. 31
20
11) Remove engine-to-transmission mounting bolt on the right
side.
Fig. 32
12) Set the special tool.
(1) Raise the car.
(2) Remove buffer rod from engine and, body side
bracket.
(3) Install ENGINE SUPPORT BRACKET (927160000)
to the body side bracket of buffer rod ASSY.
(4) Install ENGINE SUPPORT (927150000).
Fig. 63