Subaru XT 1988 Service Manual page 501

3-1
MANUAL TRANSMISSION AND DIFFERENTIAL
®
For reverse shifter rail, install ball, spring and gasket
into case and tighten plug.
Tightening torque:
18.1 -21.1 N·m
(1.85 - 2.15 kg·m, 13.4 - 15.6 ft·lb)
1 Plug
2 Gasket
3 Spring
4 Ball
Fig. 173
CD
) i
~.
I
I
@
Adjustment of reverse idler gear CP position.
Clearance:
1.5 - 3.0 mm (0.059 - 0.118 in)
Fig. 174
Part No.
1 Clearance: 1.5 - 3.0 mm
(0.059-0.118in)
2 Reverse idler gear
Reverse shifter lever
Mark
Remarks
A12·250
A12'()84
440627101 1 Recedes from the case wall
440627102 No mark Standard
440627103
3
Moves to the case wall
68
®
Clearance adjustment
Fig. 175
Washer (15.5 x 21 x t mm)
Part No.
Thickness mm (in)
803015081
0.6 - 0.8
(0.024 - 0.031)
803015082
1.0 - 1.2
(0.039 - 0.047)
803015083
1.4 - 1.6
(0.055 - 0.063)
803015084
1.8 - 2.0
(0.071 - 0.079)
803015085
2.2 - 2.4
(0.087 - 0.094)
(J)
Install rod and fork
• Interlock plunger (3 x 11.9)
• Fork rod for 3-4, 1-2 and 5th
• Shifter fork for 3-4, 1-2 and 5th
®
Install ball, checking ball spring, gasket and plug for
3-4 and 1-2.
2) Alignment marks/figures on hypoid gear set
See
p.
34
3) Adjustment of drive pinion shim
See p. 34