Subaru XT 1988 Service Manual page 1086

r
5-1
BODY AND E~XTERIOR
2) Sealed parts
All gauge holes and other holes used during the body manufacturing process are plugged to prevent entry of water and dust.
Anytime the vehicle body has been repaired, etc., the affected holes should be properly plugged with the use of the specified
plugs as shown below.
CD
-R:
Section -C
®
Section -A
Fig. 11
8
Unit{ mm (in)
1 Plug 40 (1.57)
dia.
2 Plug 28 (1.10) die.
3 Plug 12 (0.47) die.
4 Plug 20 (0.79) die.
6 Plug 36 (1.38) die.
6 Plug 10 (0.39) die.
7 Plug 23 (0.91) die.
8 Plug 10 (0.39) die.
9 Plug 15 (0.59) die.
Section - B
L5-694