Subaru XT 1988 Service Manual page 928

4-3 STEERING SYSTEM
7) Check fluid leakage.
After completely bleeding air, check pipe couplings for
leakage.
a. Do not confuse spilled oil with leakage.
b. Wipe oil off parts before checking for leakage.
8) Check and adjust fluid level.
Oil level is correct if it is between arrow marke on the COLD
side of gauge rod when reservoir surface temperature is ap-
proximately 20°C (68°F) (engine cold).
A3-285
Fig.
222
Remove excess oil using a clean syringe.
82
I