Subaru XT 1988 Service Manual page 705

TRANSMISSON CONTROL SYSTEM 3-3
SERVICE PROCEDURE
Manual Transmission
ON-CAR SERVICE
Confirm the following: (Selective 4WD vehicle only)
1) The switch activation stroke of the lever CP is 5 mm
(0.20 in). ON-operation force is not more than 14.7 N (1.5 kg,
3.3 Ib). There is no binding.
2) A single push of the switch turns on 4WD mode and an
additional push returns to FWD mode.
REMOVAL
1) Remove the console box. (Selective 4WD)
2) Disconnect the connector for 4WD switch. (Selective
4WD)
3) Remove the rear exhaust pipe.
Fig.
6
4) Remove the spring between joint CP and bracket CPo
L3467
Fig. 8
7
5) Remove the bolt to take off the stay CP from the trans·
mission.
6) Remove the bolt to disconnect the rod from the joint.
7) Remove the nut to take off the gearshift lever ASSY from
the body.
Fig.
9
DISASSEMBLY
1) Disconnect the rod from the gearshift lever ASSY.
L3469
Fig. 10