Agilent Technologies E5071C Manual page 1277

E5071C
Setup and Connection of TDR
Installing E5071C-TDR application to PC
•
Connecting E5071C-TDR with PC
•
Other topics about TDR Remote Control
Installing E5071C-TDR application to PC
Three applications need to be installed in order for E5071C-TDR to be
worked correctly:
Installing .Net Framework Version 2.0 and above
1. Ensure that .Net Framework Version 2.0 and above is installed in the
PC. Go to Windows Control Panel > Add or Remove Programs to
confirm if it is installed. If it is not installed, go to below URL and
download the latest version.
http://www.microsoft.com/downloads/
Installing Agilent IO Library
1. Ensure that Agilent IO Library (Version 15.5) is installed in the PC. If
it is not installed, go to below URL and download the latest Agilent IO
Libraries Suite executable file:
IO library 15.5 download
2. Double-click on the executable file for installation. Follow the
instruction of the installation wizard.
Installing E5071C-TDR Software
1. Download the latest TDR software from the
http://www.agilent.com/find/ena_firmware.
application into the instrument and the PC. This ensure the
remote access to the instrument works correctly
2. Download the execution file (E5071C_opt_TDR_xx.xx.exe).
3. Double-click on the executable file, E5071C_opt_TDR.msi.
4. Click Next >.
1504
Install the same revision of the E5071C-TDR