Installing Procedure - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:

Table of Contents

INSTALLATION

[MOUNTING PRECAUTIONS]

• Be sure to shut off all phases of the external power supply used by the system before mounting or

removing the GOT to/from the panel.

• Always turn off the power ON/OFF switch on the connector conversion box before connecting or

disconnecting the GOT to it.

Connecting or disconnecting the GOT with the power being turned on may result in damage to the

unit or malfunctions.

• Use the GOT in the environment that satisfies the general specifications described in this manual.

Not doing so can cause an electric shock, fire, malfunction or product damage or deterioration.

• Never drop cutting chips and electric wire chips into the ventilation window of the Handy GOT when

you drill screw holes or perform wiring.

Otherwise, fire, failure or malfunction may be caused.

• Connect connection cables securely to the specified connectors while the power is turned OFF.

Imperfect connection may cause malfunction or failure.

• Operate and store the GOT in environments without direct sunlight, high temperature, dust, humidity,

and vibrations.

7.1 Installing Procedure

Holding the Handy GOT in hand

When operating the Handy GOT with holding it in hand, put a hand under the hand strap on the back.

The hand strap length is adjustable.

When carrying or operating the Handy GOT, hold the body of the Handy GOT.

Carrying or operating the Handy GOT by grabbing the cable portion may damage the unit and cable.

7. INSTALLATION

7.1 Installing Procedure

Table of Contents