Communication Detail Setting - Mitsubishi Electric GT14 User Manual

11.2 Communication Detail Setting

11.2.1 Communication detail setting functions
Function
Communication parameters
setting
Keyword Register
Keyword Delete
Keyword Clear
Keyword Protect
11.2.2 Display operation of Communication Detail setting

Communication settings
POINT POINT POINT
Communication parameter setting by drawing software
Select [Common Settings]
parameters for each communication driver.
When changing the communication parameters after downloading project data, change the setting at
communication detail setting of GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
11. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
Set various communication parameters of communication devices. The settable parameters differ according to the
communication device.
For the FX series PLCs, key word for protecting program in the PLC can be set.
For the FX series PLCs, key word for protecting program in the PLC can be deleted.
For the FX series PLCs, the program protection status in the PLC can be cancelled.
For the FX series PLCs with the 2nd keyword in use, the cancelled program protection in the PLC can be reactivated.
Communication
parameter
[Communication Settings] from GT Designer3 to enter the communication
Description
1.
Touch the driver display BOX of the communication
parameter to be set in the [Communication setting]
screen.
2.
The screen switches to the [Communication Detail
setting] screen.
Set communication parameters from this screen.
For the setting change operation, refer to the
following.
10.3.3 Basic operation of settings change
11.2 Communication Detail Setting
9
10
11
12
13
14
15
16
11 - 7