Emergency Stop Switch Guard Cover - Mitsubishi Electric GT14 User Manual

6.5 Emergency Stop Switch Guard Cover

The emergency stop SW guard cover is attached to prevent the emergency stop SW from being operated incorrectly.
6.5.1 Applicable emergency stop SW guard cover
The following emergency stop SW guard cover is applicable for the Handy GOT.
Product name
Emergency stop SW guard cover
6.5.2 Installing procedure
6 - 8
6. OPTION
6.5 Emergency Stop Switch Guard Cover
Model
GT14H-50ESCOV Mounting screw (M3 × 6) × 1 (accessory)
1.
Remove the Handy GOT from the device or turn the entire system
power off. (Make sure that the device does not operate even if the
emergency stop of the Handy GOT is activated while mounting the
emergency stop SW guard cover.)
2.
Fit the screw holes of the emergency stop SW guard cover into
those of the GOT, and fix them with the accessory screw (M3 × 6).
(Tightening torque: 0.36 to 0.48 N•m)
Too much tightening may cause damage.
Contents