Table of Contents
Advertisement
8.5 Protective Sheet
The protective sheet is used to protect the operation surface from damage or dirt when the touch key of GOT
display section is operated.
8.5.1
Applicable protective sheet
The following protective sheets are applicable for GT11
Product name
Protective sheet
8.5.2
Installing procedure
If the protective sheet has been already attached to the GOT,
1
remove the old one from the GOT display section holding the lower
right corner.
If the protective sheet for transportation is attached to the GOT,
remove it too.
Peel the release paper from the back of the new protective sheet,
2
and attach its adhesive side to the GOT display section.
When attaching the protective sheet, make sure to fit it on the
display section closely without leaving any clearance between them.
Remark
8 - 10
8.5 Protective Sheet
8.5.1 Applicable protective sheet
Model
GT11-50PSCB
GT11-50PSGB
Protective sheet for 5.7"
GT11-50PSCW
GT11-50PSGW
Replacement time of protective sheet
Check the status of the protection sheet visually by to the daily inspection.
The visibility becomes worse when there is too much dirt and cracks, causing
malfunction. Proceeds replacement promptly.
.
Contents
Clear 5 sheets
Antiglare 5 sheets
Clear (Frame: White) 5 sheets
Antiglare (Frame: White) 5 sheets
Advertisement
Table of Contents
Troubleshooting
