I/O Check - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

15.2.5 I/O check

I/O check function
The I/O check is a function which checks whether GOT and PLC can communicate with each other.
If I/O check ends normally, the communication interface and the connection cable hardware are normal.
To execute I/O check, the communication driver has to be installed in GOT in advance from GT Designer3.
Note that the GOT restarts when this function is performed.
For the details related to the installation of the communication driver, refer to the following.
(1) Communication drivers inapplicable to I/O check
When the following communication drivers are used, the I/O check cannot be executed.
Connection to MITSUBISHI PLC
Connection to YASKAWA PLC
Connection to YOKOGAWA PLC
Connection to ALLEN-BRADLEY PLC
Connection to SIEMENS PLC
Microcomputer connection
Inverter connection
MODBUS(R)/TCP connection
Connection to Azbil control equipment
Connection to RKC temperature controller
Display operation of I/O Check
Main menu
(
10.3 Utility Display)
Touch
[Debug & self check]
15 - 14
15. GOT SELF CHECK (DEBUG AND SELF CHECK)
15.2 Self Check
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Connection type
Ethernet
connection
Debug & self check
I/O check
Communication driver
Ethernet(MELSEC), Q17nNC, CRnD-700
YASKAWA GL/CP9200(SH/H)/CP9300MS, Ethernet (YASKAWA)
YOKOGAWA FA500/FA-M3/STARDOM, Ethernet (YOKOGAWA)
EtherNet/IP(AB)
SIEMENS S7, SIEMENS S7-200, SIEMENS S7-300/400
Computer
FREQROL 500/700
MODBUS/TCP
Azbil SDC/DMC
RKC SR Mini HG (MODBUS)
Touch
[Self check]
Self check
Touch
[I/O check]

Advertisement

Table of Contents
loading

Table of Contents