Download  Print this page

Protective Sheet; Applicable Protective Sheet; Installing Procedure - Mitsubishi Electric GT14 User Manual

Graphic operation terminal.
Hide thumbs

Advertisement

8.4 Protective Sheet

The protective sheet is used to protect the operation surface from damage or dirt when the touch key of GOT display
section is operated.
For the GOT, the protective sheet is attached for transportation. (It is different from the one described in this chapter.)
8.4.1

Applicable protective sheet

Product name
Protective sheet
8.4.2

Installing procedure

POINT
POINT
POINT
Replacement time of protective sheet
Check the status of the protective sheet visually by the daily inspection.
The visibility becomes worse when there is too much dirt and cracks, causing malfunction. Proceed replacement
promptly.
8 - 6
8. OPTION
8.4 Protective Sheet
Model name
GT14-50PSCB
GT14-50PSCB
5.7" protective sheet
GT14-50PSCW
GT14-50PSGW
Description
Clear 5 sheets
Antiglare 5 sheets
Clear (Frame: white) 5 sheets
Antiglare (Frame: white) 5 sheets
1.
If the protective sheet has been already attached to the
GOT, remove the old one from the GOT display section
holding the lower right corner.
If the protective sheet for transportation is attached to the
GOT, remove it too.
2.
Remove the release paper from the back of a new
protective sheet. Do not remove the protective film.
3.
Make sure to fit the sheet on the GOT without wrinkles or
air between the sheet and the GOT.
4.
Remove the protective film from the protective sheet.
When the user continues using the GOT with the protective
film, the film may not be removed.

Advertisement

Table of Contents

   Also See for Mitsubishi Electric GT14

   Related Manuals for Mitsubishi Electric GT14

This manual is also suitable for:

Got 1000

Comments to this Manuals

Symbols: 0
Latest comments: