Connector Conversion Box (Gt16H-Cnb-37S) - Mitsubishi Electric GT14 User Manual

6.6.4

Connector conversion box (GT16H-CNB-37S)


External dimensions and part names
82 (3.22")
2)
1)
3)
No. Name
Connector for Handy GOT connection
1) (D-Sub 37pin (Female))
17JE-13370-37(D23A)-FA (DDK) or equivalent
2) Handy GOT power switch
3) Installation hole
Terminal block for the power supply and
4)
operation switch
Terminal block for the emergency stop switch,
5)
the grip switch, and the selector switch
External connection device communication
6) connector
(Ethernet: RJ-45 modular jack)
37.5 (1.47")
4)
Connects the Handy GOT through an external cable.
Supplies the power to the Handy GOT.
When this switch is set to ON, the power is supplied. Turn off this switch when attaching or removing
the Handy GOT.
Used to fix the connector conversion box to a panel directly or to a board with the mounting fixtures.
For M3 screw
Connects the 24VDC power supply of Handy GOT and the operation switch (SW1 to 6). With M3
terminal and the cover
Connects the emergency stop switch of the Handy GOT (ES-1, 2, and 3), the grip switch (DSW-1, 2)
and the keylock switch (KSW-1, 2). With M3 terminal and the cover
Connects the external connection device via Ethernet with using a LAN cable.
Terminal block cover opened
5)
Unit: mm (inch)
6)
Weight: about 0.2kg
Specifications
6. OPTION
6.6 Connector Conversion Box
1
2
3
4
5
6
7
8
6 - 29