Mitsubishi Electric GT14 User Manual page 114

(2) The panel cutting dimensions for relay cables
To install the relay cable connector to the panel, make holes in the panel with the following dimensions.
10 °
Insert a jack socket into a round hole and fix it with a M3 nut (supplied with the relay cable).
7 - 6
7. INSTALLATION
7.1 Installing Procedure
63.5 (2.5")
59.1 (2.33") or more
4- R3.4 (0.14")
M2.6
4.8 (0.19")
M3
Jack socket
2-3.2±0.1
(Panel thickness: 0.8 to 1.3 (0.031" to 0.051"))
Connecting to the
Jack socket external cable
Mounting
panel face
M3 nut
Cable side
The part in gray indicates
cut portions.
Unit: mm (inch)