12.2.6 Adjusting the touch panel position (Touch panel calibration)
Touch panel calibration setting function
Touch panel reading error can be corrected.
Normally the adjustment is not required, however, the difference between a touched position and the object position
may occur as the period of use elapses.
When any difference between a touched position and the object position occurs, correct the position with this
function.
Before adjustment
The [Run] will operate though you
intended to touch the [Stop] button.
Display operation of Touch panel calibration
Main menu
(
10.3 Utility Display)
Touch
[GOT setup]
12 - 14
12. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
12.2 Operation Setting (Settings Regarding Operation)
Run
Stop
GOT setup
Touch panel calibration
After adjustment
Run
Stop
The [Stop] button can be
touched without fail.
Operation
Touch
[Operation]
Touch
[Touch panel
calibration]