15.3 System Alarm Display
System alarm function
System alarm is the function to display error code and error message when an error occurs in GOT, controller or
network.
System alarms can be reset on the System alarm display screen.
For details of system alarm, refer to the following manual.
Display operation of System alarm display
(
15 - 20
15. GOT SELF CHECK (DEBUG AND SELF CHECK)
15.3 System Alarm Display
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Main menu
10.3 Utility Display)
Touch
[Debug & self check]
System alarm display
Debug & self check
Touch
[System alarm display]
Touching [Reset] resets the
system alarm display in the
GOT error.