Mitsubishi Electric GT14 User Manual page 227

1.
Mount the SD card/USB memory to GOT.
2.
For the SD card installation/removal method, refer to
the following.
3.
Touch [A: Built-in SD card] of [Select drive].
4.
Touching [Download] button displays the screen
shown on the left. Touching [OK] button executes the
download.
5.
If there is a project data of the same name in the C
drive, the screen shown on the left is displayed
without starting the download.
Touching [OK] button executes an overwrite
download to the project data of the same name.
Touching [Cancel] button cancels the download.
6.
When the download is completed, the dialogue box
shown on the left is displayed.
Touching [OK] button restarts the GOT.
14. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
6.1.2 Installing and removing procedures of
the SD card
6.2.2 Installing and removing procedures of
the USB memory
14.2 Various Data Control
9
10
11
12
13
14
15
16
14 - 23