Table of Contents
Advertisement
I/O check operation
(1) Connecting target confirmation
Touching [CPU] button carries out the connecting target confirmation communication check.
1.
After the CPU communication starts normally, the dialog
box mentioned left notifying that it is on checking, until
the connecting target confirmation communication ends
normally.
2.
When the connecting target confirmation
communication ends, its result is notified by dialog box.
If the connecting target confirmation communication
ends normally, the dialog box notifying of the normal
termination mentioned left is displayed. Touching [OK]
button after confirming the result returns to [I/O check].
If the dialog box mentioned left is displayed after
selecting connecting target confirmation or during CPU
communication check, confirm the following.
• No misconnection with CPU
(
GOT1000 Series Connection Manual for GT
Works3)
• No missettings of parameter
(
11.2 Communication Detail Setting)
• No hardware error.
(
20. TROUBLESHOOTING)
Touching [OK] button after confirming the result returns
to [I/O check].
15. GOT SELF CHECK (DEBUG AND SELF CHECK)
15 - 15
15.2 Self Check
9
10
11
12
13
14
15
16
Advertisement
Chapters
Table of Contents
